Related topics

How do you set multiple monitor in Win98?
If you have not removed any devices, in normal mode go to the device manager and make sure that your display adapter and monitor are properly identified and defined as in make and model. If not, manually update them. 5. Start/Run/Dxdiag Update DirectX if need be: http://www.microsoft.com/DirectX/ Microsoft DirectX

Jeszcze o ilości reboot'ów
I have also deleted the display adapter in Device Manager and tried to detect the ATI card. I've had to do this repeatedly, and eventually it detected ATI Graphics Ultra Pro. This is not exactly my card, but it is the definition I have been using successfully till now. In Device Manager under Display adapter it

display problems
So, if problems do arise, you may want to try the installation of new card and NOT add a check for "Disable in this hardware profile". * * * NEXT, set the Display Adapter to STANDARD VGA For Windows95a: * Go to Device Manager and ensure the check mark is removed from the "Original Configuration (Current)" box for

fails to load grafik drivers??????
In fact changing settings for the video card in CMOS may cause techinical problems and the installation may not succeed. The first change that may be necessary would be: * Go to Start > Settings > Control Panel > System > Device Manager * Click on the plus sign next to Display Adapter * Highlight S3 > click

BE6-II AGP Slot Amps?
Some of the display drivers for NT 4.0 are not 100% DirectX compatible. An excellent test to check the game compatiblity of your display adapter is to try Device manager still shows unknown audio device however all multimedia setting show up SBLive! Directly from the mentioned website. I have not tried this so

AGP - PCI - SOS !
Choose the DEVICE MANAGER tab. Click on the plus (+) sign beside the DISPLAY ADAPTERS label. You should just have a STANDARD VGA DISPLAY ADAPTER listed. Click on the OTHER DEVICES label if it is there (if it is not there that is ok) In OTHER DEVICES, if you have any listings for DISPLAY ADAPTERS, click on them

Display adapter not showing up in Device Manager
I do see a list of devices on cold-start of my computer that show the Bus IDs and device IDs, plus some other bits of information (like multimedia device, display device, etc.) The Windows 98 Device Manager doesn't seem to be helping me as the settings have to be made to the hardware as well.

Compaq with Riva TNT probs ....... please help !!
I have installed the correct driver many times but Win98 will not recognize the driver. I have gone into Device Manager \ Display adapters to delete the existing driver and than let win98 detect the display adapter upon startup. I installed the new driver and it appears to work when I warm booted the PC a few times

Win95 locks up on shutdown
-To enable an IRQ for the display adapter, place a "jumper block" across the two pins on the "ENA" (enabled) side, as follows: INT DIS ENA 0 0=0 -Return the product to the system, and turn the machine on -Check Device Manager AGAIN, to ensure that an IRQ is being allocated NOTE: If an IRQ is STILL not being

Display Adapter problem (yellow excl. Mark) - Part II
Perhaps the Display Adapter is the problem, maybe it remembers it has two monitors ? Should I remove it in the Device Manager first, and let the system rebuild before trying to You will not like VGA because it supports only 16 colors, but the purpose of installing it is to get rid of whatever was there before.

lock order reversal
Choose "Standard Display Types", then "Standard Display Adapter (VGA)". 9. Click OK. To change the monitor to standard VGA, low resolution, follow these steps: 1. NOTE: Do not rename the SYSTEM.INI. Renaming it will prevent Windows 95 from loading. Device Manager Follow these steps to see if there are any

MAJ pour que windows s'arrete
Just hopefully not through a clean install." --Stan Zolenski, Technical Services Analyst Driver Gotchas "My main problem after installing Windows Me was drivers. While Win98 provided me with drivers for every device I had on my system, a clean install of WinMe didn't. For my display adapter WinMe installed the old

Display Adapter not in Device Manager.
This will not disable the integrated graphics adapter, instead, it will set it to work as the secondary adapter for multi-monitor support. Go back into Device Manager, then back into the properties for the Intel 810 chipset display adapter. Click the checkbox for the item that says "Disabled in this hardware

Monitor Incompatibility Problem?
Also, in the Device Manager, there's NO DISPLAY ADAPTER listed. When I right-click on the desktop, and choose properties.. settings, it says "monitor on " (ie, it's blank where the display adapter should be named). Any ideas how I can get my display adapter shown correctly in the Device Manager? regards, Mike.

AGP STB TNT 4400 and WIN95b memory conflict
Under Device Manager click the plus symbol next to Display Adapters, you will now see the Standard PCI adapter listed below. Peace" PS:If ATI for your card does not chage your adapter to Standard VGA (or PCI) adapter as stated in step, simply get back to stop three and go into Display Properties, Adapter and

Display Adapter not shown in Device Manager
Tried installing the Creative drivers via Device manager driver upgrade... 4. Tried installing the Creative drivers via Display Adapter "change" button... 5. Tried installing the Creative drivers via "add new hardware"... The TNT2Ultra just will not be recognized... I have gotten it to show up in the device manager

Trouble with new display and Device Manager
In direct answer to your query, when there are duplications in Safe Mode Device Manager, you remove *all* of the devices in question. Reboot and let Windows reinstall. Hugh has given you some of the background on that. However, there are qualifications to that advice. The Display Adapter--Do not remove.

memory range conflicts
Click the Device Manager tab. Expand the System Devices branch. Double-click Advanced Power Management and then clear the Enable Power Management checkbox. Next you will see a complaint about the display adapter being disabled or not configured. Click Cancel. Click Cancel again when the Display Properties

16 colours
If you do not know what display adapter your PC uses, you can go to a MS-DOS prompt and type: Debug and hit enter. The screen will display a flashing prompt next to a on the computer with a 16 color screen is annoying!!!(I changed device adapter in DEVICE MANAGER in DISPLAY SETTINGS IN SYSTEM IN CONTROL PANEL.)

Presario 9232 (OLD)/S3Trio64V+ integrated
a) Open your Control Panel b) Double-click on System c) Select the Tab that reads "Device Manager" d) Double-click on the top option "Computer" e) This will bring up a list of all the IRQs being used, and which device is using it. f) Look to see if your video card is using one (will be listed as VGA Display Adapter